Icom IC-M802 SSB Radio

Standard 4 × 8 remote controller
The IC-M802 offers an industry-standard 4-inch tall (10.16
cm) remote controller. When set up with the IC-M502 VHF
radio, Icom offers you a complete communications station.
Large LCD with dot matrix characters
You can easily read the alphanumeric name of any of the
1355 ITU channels at a glance with the large LCD display.
Nighttime operation is no problem with 10 levels
(plus OFF) adjustable backlit display and keypad.
Easy to use in all conditions
The IC-M802 offers two large dials – bank and channel
– for easy channel selection. Up to 16 banks of 20
(max.) each for user channels, and 17 banks for ITU
channels are available.
Built-in digital selective calling
For added safety at sea, the IC-M802 offers the
latest in one-touch DSC emergency communications
technology. (ITU Class E standard.) The emergency
button is covered by a red, spring loaded
hatch to avoid accidental DSC activation.
Digital signal processor advantage
The speech compressor, utilizing DSP, increases
average talk power. Flexible filter settings provide
for narrow band signals like e-mail, SITOR, FSK
and other operation without an optional filter.
150W (PEP) of powerful output
150 Watts of power offers superior worldwide
communications. A one piece, die cast aluminum
chassis and a large cooling fan allow
continuous transmission at full output power –
very important for data communications, like e-mail.
One-touch e-mail access
An SSB first! The IC-M802 can be set to memorize your
HF e-mail access frequency, mode and bandwidth settings.
At sea e-mail has never been easier.
* Please consult with an HF e-mail provider for details.
Automatic antenna tuner, AT-140
An optional automatic antenna tuner, AT-140, easily connects
to the IC-M802. When the tuner cannot tune the antenna,
the IC-M802 bypasses the tuner and displays a
warning indicator on the LCD.
Other features
• Wide band receive coverage (0.5 – 29.9999MHz)
• Remote control mic allows you to select channels directly
• Accessory RS-232C port allows connection of modem, etc.
• GPS input, NMEA 0183 version 3.01
• A headphone jack in front of the controller
Frequency coverage (Unit : MHz):
Rx 0.5– 29.9999 (continuous)
Tx 1.6– 2.9999, 4.0– 4.9999, 6.0– 6.9999
8.0– 8.9999, 12.0– 13.9999, 16.0– 17.9999
18.0– 19.9999, 22.0– 22.9999, 25.0– 27.5000
• Type of emission : J3E (SSB), J2B (AFSK), F1B
(FSK), A1A (CW), H3E (AM*)
(*Rx only)
• Number of channels : 1355 (max.)
(160 programmable channels; 249 ITU SSB duplex; 72 ITU
SSB simplex; 662 ITU FSK duplex; 160 e-mail; 21 ITU
4MHz simplex; 31 ITU 8MHz simplex)
• Antenna impedance : 50Ω (SO-239)
• Power supply requirement : 13.6V DC ±15%
• Max. current drain (at 13.6V DC):
Tx (Max. power) 30A (typ.)
Rx (Max. audio) 3.0A
• Operating temp. range : –30°C to +60°C; –22°F to +140°F
Guaranteed range : –20°C to +55°C; –4°F to +131°F
• Frequency stability : ±10Hz (at –20°C to +55°C)
• Dimensions (W×H×D; projections not included):
Main unit 240×94×238.4mm; 97⁄16×311⁄16×93⁄8 in
Controller 220×110×84.4mm; 821⁄32×411⁄32×35⁄16 in
Speaker 110×110×84.4mm; 411⁄32×411⁄32×35⁄16 in
• Weight :
Main unit 4.7kg; 10.36lb
Controller 570g; 1.26lb
Speaker 370g; 0.81lb
• Output power : 150, 60, 20W PEP (Selectable)
• Spurious emissions : –62dB
• Unwanted sideband : 55dB
• Carrier suppression : 40dB
• Microphone impedance : 2.4kΩ
• Sensitivity (at 10dB S/N) :
• Spurious response rejection ratio:
Tx/Rx (1.6–29.9999MHz) More than 70dB
DSC (Except 1st IF image) More than 50dB
• Audio output power : 4.0W at 10% distortion
(at 13.6V DC) with a 4Ω load
• Audio output impedance: 4–8Ω
• Clarity variable range : ±150Hz
• GPS interface : NMEA 0183 version 3.01
GENERAL
TRANSMITTER
RECEIVER
SPECIFICATIONS
All stated specifications are subject to change without
notice or obligation.
approx. 24.5 m; 80.3 ft
OPTIONS SYSTEM OVERVIEW
AH-710 FOLDED DIPOLE
ANTENNA
Matches the transceiver to a long wire
antenna with little insertion loss. Cable
connections are easy to install.
AT-130 is also available.
Covers 1.9 to 30MHz band. Has an SO-239
connector and 30m (98.4ft) coaxial cable.
Easy to assemble (non-kink construction).
Provides 13.6V DC (30A) output from
an AC outlet.
Water resistant, remote function mic.
Same as supplied.
Match the transceiver to a longwire antenna.
Covers all HF bands from 1.5 to
30MHz. A 15m (49.2ft) antenna wire
comes attached.
• RC-25 REMOTE CONTROLLER
Remote controller head. Same as supplied.
• OPC-1106 SEPARATION CABLE
5m (16.4ft) separation cable between controller
and main unit. Same as supplied.
• OPC-1147
SHIELDED CONTROL CABLE
10m (32.8ft) shielded cable to control
AT-140.
For mounting the controller or speaker
to a panel.
4×4-inch external speaker. Same as supplied.
Input impedance: 4Ω. Max. input
power: 7W.
SP-24 EXTERNAL SPEAKER
PS-60 DC POWER SUPPLY
AT-140
HF AUTOMATIC
ANTENNA
TUNER
MN-100 ANTENNA MATCHER MN-100L ANTENNA MATCHER
MB-75 FLUSH MOUNT KIT
0.5 – 1.5999MHz
1.6 – 1.7999MHz
1.8 – 3.9999MHz
4.0 –29.9999MHz
J3E, A1A
6.3μV
0.89μV
0.5μV
J2B, F1B
–
0.89μV
0.5μV
H3E
32μV
6.3μV
3.2μV
–
DSC (J2B)
0.5μV
(at 1%
error rate)
Supplied accessories:
● Separation cable, OPC-1106 (5m; 16.4ft)
● Hand microphone, HM-135 ● External speaker, SP-24
● Mounting bracket kits ● Microphone hanger
● DC power cables ● ACC plugs ● Spare fuses

IC006Retail price: $3,400.00Our price: $1,999.99