|
|
|  | 
Icom 602 Waterproof DSC VHF Radio
Built-in ITU Class-D DSC
An independent receiver continuously
watches Ch. 70, while using
another channel. Further, a single antenna
connector allows VHF
and Ch. 70 operation, thus simplifying installation. The
10-keypad
allows simple and efficient operation of the DSC emergency
functions,
vital for your safety at sea.
Superior receiver
performance
The IC-M602 has excellent receive specifications of more
than
80dB for spurious response, and intermodulation rejection. With
such
high level performance, received calls are remarkably clear
and free from
noise. The powerful audio output from the front facing
speaker further
increases the clarity of received calls.
Simultaneous connection of two
COMMANDMIC®’s
The optional COMMANDMIC® provides a 2nd and/or 3rd station
capability
and an intercom function. All functions of the IC-M602
(except
DSC operation) can be controlled from remote locations such as
the
cockpit or tower up to a max. 21m* (70ft) from the IC-M602.
* Requires use of
optional OPC-999 extension cables.
NMEA Input/Output
When connected to a
GPS receiver, the IC-M602 indicates position
data in seconds of accuracy.
NMEA output allows you to plot other
ships received position data on a PC or
navigation equipment.
Large LCD with dot-matrix characters
The large
dot-matrix display is designed for optimum readability in
any lighting
condition. With the extra large font, the channel number
is maximized on the
display and other information can be easily read.
22 Watt 2-way Hailer
capability
When connected to a hailer, communication with other boats
or
deck/marina staff is possible. The built-in amplifier increases
talk
power to 22W making your message loud and clear. Quickly access
the
hailer via the generously-sized, backlit keypad.
Waterproof
construction
The IC-M602 including the supplied/optional microphone has
effective
waterproofing equivalent to JIS
waterproof grade 7*.
* 1m
depth for 30 minutes; except cables.
e : Tx 156.050–157.425MHz
Rx
156.050–163.275MHz
• Mode : 16K0G3E (FM)
16K0G2B (DSC)
• Usable
channels : All International, U.S.A. and
Canadian channels, plus
10
Weather channels
• Power supply requirement:
13.8V DC ±15 %
•
Current drain (at 13.8V DC):
Transmit 5.2A typical (at 25W output)
Receive
1.2A typical (at max. AF)
• Operating temp. range: –20°C to +60°C ;
–4°F
to +140°F
• Antenna impedance : 50Ω (SO-239)
• Dimensions :
220(W)×110(H)×109.4(D) mm ;
(proj. not included)
821⁄32(W)×411⁄32(H)×45⁄16(D) in.
• Weight
(approx.) : 1.35kg ; 2.97lb
• Receive system : Double conversion
superheterodyne
• Intermediate freq. : 1st 31.05MHz, 2nd 450kHz
DSC 1st
21.70MHz, 2nd 450kHz
• Sensitivity : Less than 0.32μV (at 12dB
SINAD)
• Squelch sensitivity : Less than 0.32μV
• Adjacent
channel : More than 80dB
selectivity
• Spurious response : More than
80dB
• Intermodulation rejection ratio:
More than 80dB
• Audio output
power : 5.0W typical
(at 10% distortion with a 4Ω load)
• GPS
interface : NMEA0183 Ver. 2.0 or 3.01
02YS0160 © 2002 Icom
Inc.
GENERAL
• MB-75 FLUSH MOUNT KIT
For flush-mounting the IC-M602 to
a flat surface such
as a control panel.
• HM-136B/W
SMART-SPEAKER-MICROPHONE
Detachable waterproof speaker microphone. Same
as
supplied.
• UT-112 VOICE SCRAMBLER UNIT
Enables private
communication by scrambling your
voice signal. Up to 32 scrambling codes are
available.
Not available in some countries.
• OPC-999 EXTENSION CABLE FOR
HM-127B/W
6 m (20 ft) of extension cable for additional separation
length
when using the COMMANDMIC®.
• HM-127B/W REMOTE-CONTROL MICROPHONE
The
COMMANDMIC® fits in your palm comfortably. Its
sizable LCD allows you to
control all functions of the ICM602
(except DSC operation). You can talk with
the ICM602
as an intercom.
Size (W×H×D): 63.5×125.0×31.4 mm;
21⁄2×429⁄32×11⁄4 in.
Weight (approx.;except
cables): 150 g ; 5.29 oz
Supplied accessories :
• 6 m (20 ft) of cable •
Mic. hanger
• Mounting base for cable connector
COMMANDMIC is a registered
trademark of Icom Inc. in the U.S.A.
Navigation equipment
(NMEA
In/Out)
Hailer or
Fog horn
HM-136B/W
(Supplied)
Cable
length;
Max. 21m (70ft)
IC-M602
COMMANDMIC®; HM-127B/W
(Up to two
units
connectable)
SPECIFICATIONS
®
HM-127B
(Black)
HM-127W
(White)
•
Output power : 25W or 1W (at 13.8V DC)
• Modulation system : Variable
reactance freq. mod.
• Max. Freq. deviation: ±5.0kHz
• Spurious emissions
: Less than –70dBc
• Residual modulation: More than 40dB
• Adjacent Ch.
power : 70dB
TRANSMITTER
Supplied accessories:
• Hand microphone • DC
power cable
• Mounting bracket kit
Measurements made in accordance with
TIA/EIA 603.
All stated specifications are subject to change without notice
or obligation.
RECEIVER
• Auto fog horn function with four selectable
patterns
• Detachable waterproof ‘Smart-speaker-microphone’
•
Dual/tri-watch function
• Instant access to Ch. 16 and Ch. 9 (or call
channel)
• 7 levels adjustable backlit display and keypad
• 4×8 inch flush
mount design
• Convenient “TAG” scanning function with simple add/delete
•
Auto WX scan and WX Alert function
• Optional Voice Scrambler, UT-112 for
private communication
• Black and white versions available
|
|
|
We accept:
|
|
