|
|
|  | 
Icom 402 Waterproof DSC VHF
Radio
NOT REMOTABLE
Large 2-digit Ch with scrolling channel names
Look at the
size of the LCD with
large letters and numbers! The
large, easy to see
display has
27×43mm (11⁄16×15⁄8in.) dimensions,
so
channel indications
are maximized. 10-character
channel names and all
settings
are displayed at the same time.
Easy to hear speaker
A newly
designed large speaker grill improves the output of the frontmounted
speaker.
The result is that the audio sounds even louder than
the 4.5W (typical)
output capability, even over wind or engine noise.
Built-in DSC capability
that meets RTCM SC101
The DSC watch function monitors Ch 70, while receiving
another
channel. It allows you to send a formatted distress message in
an
emergency. The position request function indicates a caller’s
position.
Up to 30 DSC IDs are memorized.
Rugged waterproof
construction
By spraying off any salt with fresh water after your outing,
the
IC-M402 is designed to work for many years.
(Equivalent to JIS 7,
submersible 1m/30min; except cables)
Optional
COMMANDMIC®
Our
COMMANDMIC®
makes it convenient for
using the IC-M402 from a
separate
cabin or tower.
It allows you to remotely
control all functions of
the
IC-M402 (except DSC operation).
It offers its own large, easy
to
read LCD, is easy to hear and is
also waterproof!
And more...
•
Dual and tri-watch functions for monitoring channel 16 (or channel
16 and
another call channel), while receiving on another channel
• Position
indication when connected to GPS (GPS is not included)
• Adjustable LCD
backlighting and key illumination in 4 steps for
nighttime operation
•
Supplied remote function Mic. for convenient channel selection
• NOAA weather
channels with alert function
• Simple and easy tag scanning system
•
Available in black
Frequency range : Tx 156.025–157.425MHz
Rx
156.050–163.275MHz
• Usable channels :
All International, U.S.A.* and
Canadian*
channels; plus 10 weather* channels
(* U.S.A. version only)
•
Type of emission : 16K0G3E (FM), 16K0G2B (DSC)
• Power supply : 13.8V DC
±15%
• Current drain : Tx 6A (at 25W output)
(at 13.8V DC) Rx 1.2A (at AF
max.)
• Operating temperature range:
–20°C to +60°C; –4°F to +140°F
•
Antenna connector: SO-239 (50Ω)
• Dimensions
(W×H×D):
153×67×141.6mm;
61⁄32×25⁄8×59⁄16in.
• Weight : 900g; 2lb
•
Output power : High 25W
(at 13.8V DC) Low 1W
• Modulation
system:
Variable reactance freq. modulation
• Spurious emissions: Less
than –70dB
• Adj. channel power: 70dB
• Receive system :
Double
conversion superheterodyne
• Intermediate freq. : 1st 21.7MHz
2nd
450kHz
• Sensitivity : 0.25μV at 12dB SINAD
• Squelch
sensitivity: 0.20μV typical
• Adj. Ch. selectivity : 70dB
•
Spurious response rejection ratio:
70dB
• Intermodulation rejection
ratio:
70dB
• Audio output power: 4.5W typical 10% distortion
with a
4Ω load
• Audio output impedance: 4Ω
• GPS interface :
NMEA0183 ver. 2.0
• MB-69
FLUSH MOUNT KIT
For flush-mounting
the
IC-M402 to a flat surface
such as an instrument
control panel.
•
HM-129B/W SMART MICROPHONE
White and black are available. Same as
supplied.
• OPC-999 EXTENSION CABLE FOR HM-127B/W
6m (20ft) of extension
cable for additional lengthening
for use with COMMANDMIC®.
01YT001D ©
2001–2003 Icom Inc.
GENERAL
TRANSMITTER
RECEIVER
All stated
specifications are subject to change without notice
or
obligation.
SPECIFICATIONS
Supplied accessories:
• Hand microphone • DC
power cable
• Mounting bracket
|
|
|
We accept:
|
|
