|
|
|  | 
| 4.5" Mono LCD |
12 or 24 VDC |
N/A |
If you are looking for a unit to show you
precise depth down to 2 ft and temperature to 0.02 of a degree, then the RD30 is
the answer. Simply connect the RD30 to our new Furuno Smart Sensor and you are
ready to go! The new Furuno Smart Sensor is an ingeniously engineered depth
sensor, entirely encased within its own transducer housing. The Smart Sensor
connects directly to the RD30 display, via the NMEA data port, without requiring
any additional processor or junction box. Power is supplied to the Smart Sensor
from the connected display. The Smart Sensor operates at 235kHz. This frequency
was chosen for its excellent ability to provide solid performance at both high
speeds and in very shallow depths. Additionally, the 235kHz frequency will not
interfere with other Furuno echo sounding equipment, including any products
running at 200kHz.
These versatile products can also be added to any NavNet® system, providing
numerous NMEA data display modes, including: Depth, Temperature, Wind Data,
Speed, Bearing, Course, Position, etc.
Standard Features
- Versatile, Multi-Function, NMEA0183 Display and Data Repeater
- Rugged, Waterproof Housing with 4.5” Silver Bright LCD
- Two independent NMEA0183 Input and Output Ports
- Programmable data-combiner, for mixture of NMEA0183 input port data to
output port
- Up to 8 NMEA Data parameters can be combined onto either or both
NMEA0183 Output Ports
- Five Fully Programmable User Display Modes with Text, Graphic, and
Graphing Capabilities
- Compatibility and Capability to Mix NMEA0183 Sources from any NMEA0183
device
- Simultaneous Alarm Setting Capabilities for the following
parameters:
Temp (.01)/Depth/Speed/Arrival/Anchor/XTE/Trip/Odometer/Timer
and Countdown Timer
- Multiple Displays can be “Daisy-Chained” using a maximum of three
displays in a chain
- Power to the displays can be controlled from a NavNet display or the
first RD-30 in the chain
- Programmable “Offsets” are provided from Depth, Temp, Speed, Time and
Wind Information
- “Built-In” LORAN TD converter
- Resettable Trip and Odometer Functions
- Optional Smart Sensor connects to and is powered by the RD30
display
- Cable Extensions will not affect temperature sensing or depth
measurements.
- Spare NMEA0183 Input Port allows RD30/Smart Sensor System to be
utilized simultaneously
as a Remote Navigation Data Repeater
- Optional Smart Sensor features 235kHz Digital Echo Sounder and
Standard/High Precision Temp Sensor
- Unique 235kHz provides superior High Speed and Shallow Water
performance
- Smart Sensor Performance - Approximately 2.5 feet min. - 330 feet max
(.8 meters-100 meters)
at speeds up to 50 knots depending on installation
and placement
Shipping Information
Power
Requirements
|
|
|
We accept:
|
|
